Aluminum template shot renovated efficiency behind the dosage of buildings, the traditional aluminum template cleaning is accomplished by artificial through soaking, pickling to remove residual aluminum formwork surface sediment, so the efficiency is not high, and pickling not environmental protection, also have harm to human body, expressly prescribed by the state environmental protection administration in 2013 can no longer use hydrochloric acid cleaning aluminum template. This through the continuous research and development of technicians finally designed aluminum template shot blasting machine equipment.
Aluminum template shot blasting machine can realize automatic cleaning cement, concrete and other impurities, environmental protection and dust-free, automatic frequency control, according to the surface condition of aluminum template to choose, high cleaning efficiency. The aluminum mold is manually discharged to the feed conveyor belt, and sent to the closed cleaning room by the net belt. The high-speed rotating impeller of the shot blasting device accelerates the shooting to the surface of the aluminum mold. The impact and scraping are carried out on the surface of the aluminum mold to remove the dirt and adhesive cement on the surface of the aluminum and remove the surface stress of the aluminum.
Aluminum template shot blasting machine is generally used to clean the cement concrete and other impurities on the surface of the aluminum template rented by customers. Automatic profile shot blasting machine series of equipment, horizontal through type shot blasting machine, there are multiple independent units. In general, the equipment does not need a foundation. The equipment mainly consists of: manganese material shot blasting chamber, 10-16 casting head, wear-resisting protective lining plate, feeding, discharging chamber body. Shot feeding system, shot conveying and storage system, optional shot cleaning system, dust removal system and the entire electrical control cabinet.
Design and operation sequence of aluminum template shot blasting machine: conveying raceway conveying workpiece to shot blasting room, and then start the switch to control the supply of shot material, the results are as follows: when there is aluminum template with cement in the shot blasting room, start the head. In this way, equipment and other wearing parts will produce less wear. Peripherals can meet the needs of users. The workpiece can be manually or automatically transported to the inlet or out of the outlet. The seal of the entrance and exit prevents the steel shot from flying out. The exit raceway is equipped with a shot collecting bucket, where the residual shot can be removed manually or by cleaning device, and then recycled and reused. The cleaning methods of residual shot material at the exit of aluminum template shot blasting machine are: pneumatic cleaning. The pneumatic and mechanical combination of compressed air and a rotating roller brush that is adjustable in the direction of the height of the cleaning head has a unique arrangement, slightly tilted in the direction of the shot blasting:
The cleaned aluminum mold continues to walk along the mouth end through the roller table. The blowing device installed at the end of the cleaning room can blow clean the accumulated steel shot and cement powder on the surface of the aluminum mold, and then the cleaned aluminum mold is sent out through the blanking roller table.
The cleaning room of aluminum formwork reconditioning shot blasting machine adopts a box structure made of steel frame steel plate welding, which is divided into sealing area of feeding end, cleaning area of shot blasting and sealing area of discharging end. The main chamber is lined with wear-resistant cast iron protective plate to protect the chamber wall, and the wear-resistant protective nut is fixed on the chamber wall to prevent the projectile from penetrating the chamber body shell.
There are auxiliary rooms on both sides of the main room of aluminum template renovation shot blasting machine. There are multiple rubber sealing curtains inside and outside the auxiliary room to prevent the projectile from flying out. The main and auxiliary rooms are equipped with access doors for more convenient maintenance.